"So Happy To See You"

I've been doing a lot of R&D this spring and summer with steel mesh and paperclay slip. Finally, I got to complete a piece.

"So Happy To See You" is a collection of 11 organic-looking pods presented on a custom made wooden stand.

The pods are fabricated out of wire mesh and then dipped in Gault 10 paper clay slip to the thickness I desired. They are bisque fired to Cone 06.

The base is birch plywood laminated with the end grain showing and finished with hand rubbed polyurethane which brings out the natural color of the birch. Small feet are attached to the base to lift the entire installation off the pedestal giving it a "floating" feel.

This piece is meant to be seen from all sides and the view is invited to walk around the work to take in the different perspective.

I hope you get a smile when you see the pods greeting you.

Paperclay and Inclusions - Part 2.

© 2009 by Anthony Foo.

The advantages of Paperclay continues.

In Part 1, I talked about the various organic materials that can be incorporated/kneaded into paperclay to create interesting and random textures. Another advantage of the paper fibers in paperclay is its ability to coat and adhere to various materials that ordinary clay will not. The paper fibers will "grab" on to the irregularities of the surface to be coated and hence form a foundation for the clay to stay on.

In my sculptures, I've used paperclay to coat steel mesh (hardware cloth aka chicken wire), cotton twine, thin reeds, flowers,  twigs. etc. The paperclay I've used is the sculpture body paperclay from Aardvark (IMCO in Sacramento is the manufacturer) and the Southern Ice Porcelain Paperclay, imported from Australia by Laguna Clay Company in Los Angeles. Laguna Clay Company has stopped carrying the Southern Ice Porcelain Paperclay, probably because of its cost.

Both types of paperclay will can be used with the above mentioned materials.  The paperclay slip is made to a "heavy cream" consistency for the brushing method.

When I first start out, I usually brush it on with a soft fan brush, liberally loaded with the paperclay slip. This can be messy work so spread out old newspapers for easy of clean up after. It's slow work here as you need to let the first coat dry completely before the next application. It may not look like much but you are already coating your object with the paper pulp fibers.

I prefer brushing to dipping because I can control the coverage of the details. You may prefer the dipping method if the object to be coated is small enough to fit into your bucket of paperclay slip. Shake off the excess slip and let dry. The first few coats will be slow going until you have built up several coats. From here, it goes pretty fast as the fresh paperclay slip will stick on to the bone dry paperclay coat extremely well. This is actually the fun part and I enjoy this time the most. You can literally see the layers build up.

If you are using the dipping method, it's best at this point to thin out your paperclay slip a bit or else you will have to much slip adhering to your object with each dip. The dipping method is faster but if you are not careful, it will cover up/obliterate the details you have on your object. You can also use a combination of brushing and dipping. Whatever works for you to get to the desired thickness of coverage and still show the details.

In this discussion, I'll use my sculpture "Trapped" to show the different stages in the coating technique. The piece is bisqued fired only. The bamboo reeds and cotton twine burns out; the steel mesh is still encapsulated within the paperclay coating.

The sculpture could probably go to Cone 3 or 5 with the steel wire embedded in it, but since I'm using a community kiln, I'd rather not risk damaging the kiln. 

Initial forming stage - Materials used here are chicken wire, bamboo reeds, cotton twine.

After first coat of paperclay slip, brush technique, drying in the sun.

After 2nd day of coating. There must have been approx. 15 coats already here. I lost count!

Final stage. I'm happy with the coverage and thickness of the paperclay slip over the entire structure. The build up of coverage is anywhere from 3/16" to 1/4" thick.

Paperclay On Different Surfaces

This was the start of my piece titled "Trapped". The initial forms were made from chicken wire (galvanized steel mesh), wood reeds and thick cotton twine (left picture).

The Southern Ice Porcelain Paperclay slip was brushed on, layer by layer to build up a sufficiently thick coating. Each layer was allowed to dry before a new coat was applied.  The initial progress was slow, but as the layers built up, it became easier and faster with successive layers. In the end, it was a matter of deciding how thick was thick enough to show all the details I wanted to show (right picture).

I decided to make a hollow sphere (representing the world) from the same clay, drew in the major continents and islands on it freehand, and using the paperclay slip, build up the land mass to give it some topographical texture.

The piece was fired (as separate pieces) at Cone 04 (bisque temp). The wood reeds and cotton twine burnt away. The steel mesh is still within the clay.  A light pearlescent acrylic wash was applied over the raised surfaces of the world to subtly contrast it against the white clay. No glazes are used.

"What is caught in the trap?" In Asia, this kind of trap is used to catch fish. At first glance, it looks like a white ball has been caught. On closer inspection, we can make out that it is the world; our world. The choice of using this very white clay is deliberate. In Eastern culture, white has an ominous meaning.

Special Recognition for Anthony Foo’s Ceramic Works

I'm really honored to have my pieces receive "Special Recognition" at the Upstream People Gallery “10th Annual Contemporary Art International Online Juried Art Exhibition. My works: “Daily Assault", "Empty Calories", and "Last Boat Out” were chosen from approximately 250 entries.  (Links to all my exhibited works: “Daily Assault” “Last Boat Out” “Empty Calories” “Landed” “Where Have All The Forests Gone?”)

“Foo is an accomplished ceramicist,” said Larry Bradshaw, curator of the show and professor of art. “All of his pieces are strong and significant in today’s contemporary ceramic art. “Daily Assault” is a dramatization of the effects of a daily bombardment. “Empty Calories” interestingly handles the idea of poor nourishment in some of our food choices today. Another striking piece is “Forest Gone”. And “Last Boat Out” continues with his play upon the circular element."

This piece which is the 4th in my "Earthship" series has become my favorite piece. I fell in love with the shape of the hull and started a series of them. This may be the last one I make so I decided to change the title of the piece to "Last Boat Out."

It actually has a very poignant story behind it. I have a close Vietnamese friend who shared with me how he and his family got out of Vietnam during the refugee crisis. Malaysia was one of the "processing" countries in the region who accepted these "boat people." To cross from Vietnam to the east coast of Malaysia, they would have to battle rough seas, starvation and avoid the pirates plying in that area. 

This piece depicts this courageous and perilous journey. The boat is crammed with people (pods); everyone carrying their worldly possessions (the silvery acrylic wash), hoping to make it to a better place. It makes me appreciate what we have here in America. Things that we cannot and must not take for granted - Freedom, and the desire of people to seek it, no matter what the cost.

"Empty Calories" was an impromptu creation. I had left over steel mesh from another project so I decided to see if I can make a tea set (for the Tea Set exhibition at the Irvine Fine Arts Center, April 2008) out of the scraps. 

I first created the metal sculpture, figured out how to join the various pieces of the tea pot. The tea pot and cups are double walled. The metal sculpture was then dipped into thin Southern Ice porcelain paperclay slip and allowed to dry.

Successive dippings were required to build up to the desired thickness. It is fired to Cone 04, with no glazes. The metal mesh is still inside the sculpture. The title of the piece came to me at the last moment, and I think it's very aptly named. After all, tea (without sugar or milk) does not have any calories!

To view more of my works, please visit my website, www.anthonyfoo.com
Upstream People Gallery, www.upstreampeoplegallery.com