Showing posts with label bisque fire. Show all posts
Showing posts with label bisque fire. Show all posts

Tuesday, May 1, 2012

Van Gilder's Flashing Slip

I had a fellow ceramic artist ask me about the Van Gilder's flashing slip. Here's my understanding of it. The information presented is from my own experiences.

The Van Gilder's flashing slip is a thick slip that's available for use at the Irvine Fine Arts Center. It can be used thick for slip trailing or thinned down for painting application with a brush.

In theory, it is supposed to "flash" (ie have twinges/flashes of yellows, oranges) when you fire to Cone 10 reduction (highly reduced firing).  I've only seen in flash orange once on my pinch bowls and it was rather pretty.

I use it because it cracks predictably at Cone 10. It starts cracking after bisque fire to give you a nice texture. Most of the time, I use a wash of red iron oxide or manganese dioxide to impart color into the cracks. The red iron oxide will be anywhere from reddish brown to warm black. The manganese dioxide is blue black.  I sponge off the excess stain from the cracked surface leaving only the stains in the cracks. The piece is then fired to Cone 10 reduction (in a gas kiln).

When applied correctly, the results are very attractive. This piece has the flashing slip applied to the tentacled pods and the short stubby thorns.  I used manganese dioxide stain. You can see the cracking in those areas.

This is the kind of flashing that can happen in the correct environment. Notice the oranges.

Sunday, September 25, 2011

"So Happy To See You"

I've been doing a lot of R&D this spring and summer with steel mesh and paperclay slip. Finally, I got to complete a piece.

"So Happy To See You" is a collection of 11 organic-looking pods presented on a custom made wooden stand.

The pods are fabricated out of wire mesh and then dipped in Gault 10 paper clay slip to the thickness I desired. They are bisque fired to Cone 06.

The base is birch plywood laminated with the end grain showing and finished with hand rubbed polyurethane which brings out the natural color of the birch. Small feet are attached to the base to lift the entire installation off the pedestal giving it a "floating" feel.

This piece is meant to be seen from all sides and the view is invited to walk around the work to take in the different perspective.

I hope you get a smile when you see the pods greeting you.

Monday, May 18, 2009

Another success with Paperclay

I made this planter for an upcoming planter show at the Irvine Fine Arts Center out of salvaged ordinary clay. A big hairline crack (from the rim to almost the center of the bowl) developed in the bowl section of the planter when I used too much force to try to reshape the bowl. Paperclay slurry and slip was used for the patch.

It went through bisque fire and the Cone 10 reduction firing without any problems. The repair held up nicely. Another piece rescued with the help of paperclay slip.

The glaze is carbon trap shino. The piece was too large to be dipped so the glazed was brushed on. More glaze was hand drizzled on the bottom part of the piece.

The picture shows the completed planter with the succulents in place, ready for the show!